• Clear baked paint finish

PRO/SPORT Under Drive Application Listing

The PRO/SPORT Under Drive Dampers   Accessory drive systems have been made more compact on Late Model V8 engines like the Ford 4.6L and the GM LS1 by machining serpentine belt grooves on the OD of the crankshaft damper. The crankshaft damper functions as a combination crank damper and crank pulley on these engines. Under drive dampers are smaller in diameter than stock production crank dampers which slows the speed of the accessories and reduces the HP required to drive them. Since performance and racing engine applications generally run at higher RPM, the water pump, alternator and power steering pump speeds can be reduced to save HP and still meet engine cooling, electrical and vehicle steering requirements.

 

The trick is to reduce the crank damper diameter without losing the torsion control capability required to prevent engine vibration and possible damage. The PRO/SPORT Under Drive dampers have been specially tuned to control crankshaft torsional vibration to stock production levels.

 

Dynamometer tests of the PRO/SPORT 25% under drive damper on a 2005 Mustang 4.6L 3V engine at Livernois Motorsports in Dearborn Heights, Michigan produced a 13 HP gain over a stock production damper.

Warning: Engine cooling and battery charging will be reduced and may not be adequate for city driving.

1996 - 2006 FORD MUSTANG 4.6L V8 ENGINES

• Available in Damper only or Damper & Pulley Kit configuration

• 25% Under Driven Poly-V groove design.

• All Steel Water Pump pulley is finished in black powder coat.

• Steel Alternator Pulley finished in black powder coat (where supplied).

• Kit contains new crank bolt, installation bolt & alternator bracker bolt.

GM LS1, LS2 & LS6 V8 ENGINES

• 25% Under Driven front Poly-V groove accessory drive.

• 22% Under Driven rear A/C Poly-V groove on 98-05 Camaro & Firebird & 04-06 GTO LS1 & LS2 models.

• 7% Under Driven rear A/C Poly-V groove on 97-06 LS1, LS2 & LS6 Corvette models.

• Steel Alternator Pulley finished in black powder coat (where supplied).

• Keyway

Note: NEW OE crank bolt (GM Part# 12557840) and NEW belts are required when installing the dampers.

PRO/SPORT Under Drive Application Listing